PDA

View Full Version : Help!! Heater controls dont work.


Storm
19th November 2006, 04:10 PM
After puting a gauge in place of my clock, the heater now seems to have stoped working. I push the buttons button nothing is happening.
Firstly where is the fuse so that I can check it hasn't blown.
I have pushed the two orange plugs on tight and to no avail.
Is there some sort of reset you have to do after disconnecting the heater for a period of time?

Carl

Kev.O
19th November 2006, 04:36 PM
I've sent you a PM on .netty

Martin F
19th November 2006, 05:38 PM
I've sent you a PM on .netty


How about posting the possible solution on here for people who do future searches?

This place is starting to get like a meeting in a lodge with all the secret PM's !

Kev.O
19th November 2006, 06:17 PM
Sorry Martin. I seen the thread on .netty first.

Here's my offer of help, not sure how useful it is but here it is anyhow:

I blew a fuse. Not the panel one like I first thought and checked, but the one marked cig-15 amp.

Storm
19th November 2006, 11:35 PM
I nearly always post everything on both sites so as to get as much help as possible.
A thankyou to Kev.O for answering my thread on both sites to.
As posted on other site:-

Often if something ceases to work after one has just medled then it's lightly to be a fuse or something not plugged back in correctly.
In my case it turned out to be the latter.
In my rush to put things back together before Dark set in, I did not plug one of the orange plugs that plugs into the units on top of the radio.
Clearly more haste & less speed is the order of the day.


Carl

Kev.O
20th November 2006, 05:16 PM
Glad you got it sorted in the end Carl