|
Chassis Drive train, Brakes, Steering and anything else chassis wise |
|
Thread Tools | Display Modes |
|
24th March 2011, 06:41 PM | #1 |
Older but no brighter
Jap Spec RZ - Manual (TT) Join Date: Feb 2004
Location: Reading, Berks
Posts: 83
|
Rolling Radius ?
Would a difference of 4.3% between front and rear tyre diameters have an adverse affect on ABS sensors?
__________________
'96 Gunmetal TT6 Facelift '97 Jaguar 3.2 Sport 455bhp 420lbft @ 1.45 bar at HyperSR Dyno Dynamics |
24th March 2011, 10:21 PM | #2 |
Administrator
|
What do you mean by adverse affect?
If you mean damage them, that would be a no. If you mean upset their measurement in relation to each other then i'd say unlikely as that seems like too small a difference.
__________________
Martin UK6TT + Bits & Bobs 'Remember folks, the inside lane isn't just for Xmas' MSOC FAQ MSOC Members Discounts MSOC Resources |
25th March 2011, 03:38 PM | #3 |
Older but no brighter
Jap Spec RZ - Manual (TT) Join Date: Feb 2004
Location: Reading, Berks
Posts: 83
|
Thanks for the reply Martin, didn't anticipate it doing any damage just that it might not like the fact that the axles were rotating at different speeds but as you state not a huge difference.
__________________
'96 Gunmetal TT6 Facelift '97 Jaguar 3.2 Sport 455bhp 420lbft @ 1.45 bar at HyperSR Dyno Dynamics |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|