|
Engine Tuning All technical chat regarding the 2JZ |
|
Thread Tools | Display Modes |
31st August 2004, 11:08 AM | #1 |
Non-Approved Trader
Join Date: Sep 2003
Location: Shropshire
Posts: 247
|
Anyone know the flow rate for Denso purple side feeds, marked 195500-2460 please?
|
31st August 2004, 11:56 AM | #2 |
Senior Member
None - Don't currently own a MKIV Supra. Join Date: Sep 2003
Location: Essex
Posts: 605
|
Just had a look in the HKS book as most (if not all) of their injectors are sourced from Denso but can't see any purple ones
Do you know their origin Chris? Or are they a generic injector?
__________________
Nathan TDI PLC We like VVT-i's, especially ECU solutions :-) |
31st August 2004, 12:05 PM | #3 |
Non-Approved Trader
Join Date: Sep 2003
Location: Shropshire
Posts: 247
|
Cheers for looking nathan, they are in my Skyline GTS-t, most of the stuff on it is Apexi (turbo, cams,pistons, blah blah), so I suspect the injectors maybe too. I can't find any English language Apexi parts listings on the web though, nor can i reference the Denso part number. It's making a genuine 500 + BHP, so they must be about 550 cc or bigger i guess, as duty rate even at peak torque is only 40 odd percent. i suspect they may be around 700 CC. I could take `em out but the car is not here and I'm mad busy and.... You get the picture
|
31st August 2004, 02:48 PM | #4 |
Senior Member
None - Don't currently own a MKIV Supra. Join Date: Sep 2003
Location: Essex
Posts: 605
|
Damn...the Apexi goods master only shows a set of yellow injectors....550cc.....for PS13/S14/S15/ECR33/Y33
The next size up they list is 740cc....next one down is 440cc.....lets hope it's the former They don't list any bigger than 740cc.....odd.
__________________
Nathan TDI PLC We like VVT-i's, especially ECU solutions :-) |
31st August 2004, 04:03 PM | #5 |
Member
Join Date: Sep 2003
Location: w yorkshire
Posts: 85
|
N3A1-13250
(ND 195500-2460) primary injector 13B - REW preskg/cm xx cc/min 2.55 xx 530 3.05 xx 590 3.55 xx 625 data from apexi |
1st September 2004, 10:56 AM | #6 | |
Non-Approved Trader
Join Date: Sep 2003
Location: Shropshire
Posts: 247
|
Quote:
|
|
1st September 2004, 11:21 AM | #7 |
Member
Join Date: Sep 2003
Location: w yorkshire
Posts: 85
|
there is no english apexi info really available on the net or through apexi for that matter unless u r an apexi power excel dealer. but a friendly guy at apexi helped me out once and pointed me to this page. it's a jap page but translated in the link by babelfish. goto TOP FRAME electronics -> LEFT FRAME each part data -> LEFT FRAME top or side feed to get to the injector info. its a great resource with flow rates and lag times at different pressures.
HTH. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|