J-Spec Headlights

jimbob · 29th May 2009, 10:32 AM

Sorry to post dredge, but I tried a new method last week that has produced amazing results. After taping round the headlights to protect the paint, I wet-sanded the lenses with 2000 grit wet until there was a white residue over the entire lenses. I then got a mate to buff (I don't own an orbital buffer) them using g3 compound, and finally sealed them with a coat of wax. It's important to use the lowest/slowest setting on the buff, too high will generate heat and you'll run the risk of heat spots or marking the lenses. The entire process took maybe twenty minutes and they're looking better than they ever have even though I regularly cleaned mine in the past with plast-x/rubbing compound etc.
Well worth doing, you'll be amazed at the difference sanding them makes.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
J Spec Headlights Very Very Good Condition	mr lover	Private	13	11th April 2007 11:51 PM
Headlights J-spec	god father wheels	Exterior, Interior and Detailing	30	4th March 2007 02:46 PM
Headlights	jet	Exterior, Interior and Detailing	6	11th October 2005 02:11 PM
Jap spec connectors	UltraFlynn	ICE	6	20th June 2005 08:25 PM
Twin turbo uk spec v j spec		General Supra Chat	3	8th September 2004 10:13 PM

29th May 2009, 10:32 AM	#1
jimbob Junior Member Jap Spec SZ - Auto (NA) Join Date: Sep 2007 Location: n ireland Posts: 15	Sorry to post dredge, but I tried a new method last week that has produced amazing results. After taping round the headlights to protect the paint, I wet-sanded the lenses with 2000 grit wet until there was a white residue over the entire lenses. I then got a mate to buff (I don't own an orbital buffer) them using g3 compound, and finally sealed them with a coat of wax. It's important to use the lowest/slowest setting on the buff, too high will generate heat and you'll run the risk of heat spots or marking the lenses. The entire process took maybe twenty minutes and they're looking better than they ever have even though I regularly cleaned mine in the past with plast-x/rubbing compound etc. Well worth doing, you'll be amazed at the difference sanding them makes.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)