Racing harness - Page 2

Cass · 6th April 2009, 06:09 PM

You can get the eye bolts HERE, but if you search uk sites you will probably get them cheaper

jay200bhp · 6th April 2009, 06:35 PM

cass what i mean is did you have harnesses bolted into the tunnel on a plate obviously having had to drill through which im keen to avoid or was it bolted to the rear seat fixing? i would use eye bolts to just wondered if paul whiffins way of bolting throught the tunnel was "the only" way??

i think driftworks are amongst the most reasonable for eyebolts in the uk ...linky below!
http://www.driftworks.com/catalog/pr...s-eyebolt.html

Cass · 7th April 2009, 05:56 AM

Nope not at all. The eye bolts replaced the original 2 rear bolts on the drivers seat frame, therefore leaving the rear seating area free and un harmed.

jay200bhp · 7th April 2009, 07:12 PM

hmm thats what i though dunk im quite a tall chap being 6 foot 3 and i have to have the seat back as far as it will go and so my backside would line up with the rear bolts of the seat frame! could you have an investigation though if poss duck id appreciate that! un decided on 3 or 4 point either way ill have to bolt it on the rear seatbelt fixings just wether or not i use one or both of them!

dunk shaw · 8th April 2009, 07:04 AM

I'll try and have a look at this today, are you fitting a proper race type seat as well ? if you are then the o/e belt mount for the left side of the harness wont be there.
If your using the stock seat then i'd have thought you could just use the mount where the seat belt bolts to it.

jay200bhp · 8th April 2009, 09:17 AM

yes dunk im going to keep the oem leather seats !id appreciate you having a look then !

thanks fella!i agree about the mounting whilst keeping the oem seats

dunk shaw · 9th April 2009, 06:34 AM

Didnt get chance to have a look yesterday as i was a bit busy but i hope to find a bit of time today.

Just a thought if your using the oe seats, can you get the shoulder straps under the headrest as they cant go round the seat.

jay200bhp · 9th April 2009, 09:23 AM

thats no worries at all dunk thankyou for looking it up when you get a minute, i saw some pics of a supra with oem seats and 4 point harnesses and they were as you say slotted underneath the headrest! do these come up on the supra a bit or is that little plastic clip lever thing a seatbelt retainer

cheers dunk

jay

dunk shaw · 11th April 2009, 08:25 AM

Hope your not in a rush Jay, my pal cleared off fishing for the weekend yesterday so i cant get at my car thats in his workshop, he's back in tuesday so i'll try and have a look then.

jay200bhp · 11th April 2009, 01:08 PM

thats cool dunk cheers jay

6th April 2009, 06:09 PM	#1
Cass Beer and more Beer Single Turbo - Auto Join Date: Aug 2006 Location: Inverness / Scotland Posts: 3,610	You can get the eye bolts HERE, but if you search uk sites you will probably get them cheaper __________________ "Freezing worms makes them easier to sharpen!"

6th April 2009, 06:35 PM	#2
jay200bhp Senior Member Single Turbo - Manual Join Date: Apr 2007 Location: oxfordshire Posts: 786	cass what i mean is did you have harnesses bolted into the tunnel on a plate obviously having had to drill through which im keen to avoid or was it bolted to the rear seat fixing? i would use eye bolts to just wondered if paul whiffins way of bolting throught the tunnel was "the only" way?? i think driftworks are amongst the most reasonable for eyebolts in the uk ...linky below! http://www.driftworks.com/catalog/pr...s-eyebolt.html __________________ [I]Jap spec 6 speed TT Forged short motor BC Rods Mahle pistons Single Precision T67 Turbo Greddy manifold and wastegate Syvecs S6 and Toucan touch screen Work Kai Wheels Ridox front wings and diffuser Full Ox blood leather interior TRD steering wheel Mapped by Ryan G @ SRR 803bhp

7th April 2009, 05:56 AM	#3
Cass Beer and more Beer Single Turbo - Auto Join Date: Aug 2006 Location: Inverness / Scotland Posts: 3,610	Nope not at all. The eye bolts replaced the original 2 rear bolts on the drivers seat frame, therefore leaving the rear seating area free and un harmed. __________________ "Freezing worms makes them easier to sharpen!"

7th April 2009, 07:12 PM	#4
jay200bhp Senior Member Single Turbo - Manual Join Date: Apr 2007 Location: oxfordshire Posts: 786	hmm thats what i though dunk im quite a tall chap being 6 foot 3 and i have to have the seat back as far as it will go and so my backside would line up with the rear bolts of the seat frame! could you have an investigation though if poss duck id appreciate that! un decided on 3 or 4 point either way ill have to bolt it on the rear seatbelt fixings just wether or not i use one or both of them! __________________ [I]Jap spec 6 speed TT Forged short motor BC Rods Mahle pistons Single Precision T67 Turbo Greddy manifold and wastegate Syvecs S6 and Toucan touch screen Work Kai Wheels Ridox front wings and diffuser Full Ox blood leather interior TRD steering wheel Mapped by Ryan G @ SRR 803bhp

8th April 2009, 07:04 AM	#5
dunk shaw Old Timer None - Don't currently own a MKIV Supra. Join Date: Jan 2005 Location: west mids Posts: 4,196	I'll try and have a look at this today, are you fitting a proper race type seat as well ? if you are then the o/e belt mount for the left side of the harness wont be there. If your using the stock seat then i'd have thought you could just use the mount where the seat belt bolts to it. __________________ dunk

8th April 2009, 09:17 AM	#6
jay200bhp Senior Member Single Turbo - Manual Join Date: Apr 2007 Location: oxfordshire Posts: 786	yes dunk im going to keep the oem leather seats !id appreciate you having a look then ! thanks fella!i agree about the mounting whilst keeping the oem seats __________________ [I]Jap spec 6 speed TT Forged short motor BC Rods Mahle pistons Single Precision T67 Turbo Greddy manifold and wastegate Syvecs S6 and Toucan touch screen Work Kai Wheels Ridox front wings and diffuser Full Ox blood leather interior TRD steering wheel Mapped by Ryan G @ SRR 803bhp

9th April 2009, 06:34 AM	#7
dunk shaw Old Timer None - Don't currently own a MKIV Supra. Join Date: Jan 2005 Location: west mids Posts: 4,196	Didnt get chance to have a look yesterday as i was a bit busy but i hope to find a bit of time today. Just a thought if your using the oe seats, can you get the shoulder straps under the headrest as they cant go round the seat. __________________ dunk

9th April 2009, 09:23 AM	#8
jay200bhp Senior Member Single Turbo - Manual Join Date: Apr 2007 Location: oxfordshire Posts: 786	thats no worries at all dunk thankyou for looking it up when you get a minute, i saw some pics of a supra with oem seats and 4 point harnesses and they were as you say slotted underneath the headrest! do these come up on the supra a bit or is that little plastic clip lever thing a seatbelt retainer cheers dunk jay __________________ [I]Jap spec 6 speed TT Forged short motor BC Rods Mahle pistons Single Precision T67 Turbo Greddy manifold and wastegate Syvecs S6 and Toucan touch screen Work Kai Wheels Ridox front wings and diffuser Full Ox blood leather interior TRD steering wheel Mapped by Ryan G @ SRR 803bhp

11th April 2009, 08:25 AM	#9
dunk shaw Old Timer None - Don't currently own a MKIV Supra. Join Date: Jan 2005 Location: west mids Posts: 4,196	Hope your not in a rush Jay, my pal cleared off fishing for the weekend yesterday so i cant get at my car thats in his workshop, he's back in tuesday so i'll try and have a look then. __________________ dunk Last edited by dunk shaw; 11th April 2009 at 08:37 AM.

11th April 2009, 01:08 PM	#10
jay200bhp Senior Member Single Turbo - Manual Join Date: Apr 2007 Location: oxfordshire Posts: 786	thats cool dunk cheers jay __________________ [I]Jap spec 6 speed TT Forged short motor BC Rods Mahle pistons Single Precision T67 Turbo Greddy manifold and wastegate Syvecs S6 and Toucan touch screen Work Kai Wheels Ridox front wings and diffuser Full Ox blood leather interior TRD steering wheel Mapped by Ryan G @ SRR 803bhp

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)