4th March 2009, 10:11 PM | #11 |
Administrator
|
Unless an LED or two goes
I've put mesh on my side vents as well but purposely did not go all the way to the top so that I can get at the indicator bulbs if I need to. You can't notice unless you get on your hands and knees.
__________________
Martin UK6TT + Bits & Bobs 'Remember folks, the inside lane isn't just for Xmas' MSOC FAQ MSOC Members Discounts MSOC Resources |
4th March 2009, 10:40 PM | #12 | |
Officially NOT in Wales!
UK Spec - Manual Join Date: Oct 2005
Location: Bristol
Posts: 4,130
|
Quote:
This mesh doesn't go to the top but it would be difficult to get to the holder with it in place.
__________________
Kev To be single is to be skint |
|
5th March 2009, 09:48 PM | #13 |
Officially NOT in Wales!
UK Spec - Manual Join Date: Oct 2005
Location: Bristol
Posts: 4,130
|
Well I gave it a sand down tonight. I know it's nowhere near finished but it's getting hard to see where the filler is required, so I've given the duct a scratch coat. Most of the imperfections is where different filler was used, and I would imagine would get covered in a few coats of paint. I can now work on filling the effected areas:
__________________
Kev To be single is to be skint |
5th March 2009, 10:22 PM | #14 |
Old Timer
Jap Spec GZ - Auto Aerotop (TT) Join Date: Jul 2004
Location: Worcester
Posts: 2,089
|
At the moment Kev I'd say it looks like a small explosive device has gone off in your air box, interested to see how the finished article turns out.
|
5th March 2009, 10:49 PM | #15 |
Officially NOT in Wales!
UK Spec - Manual Join Date: Oct 2005
Location: Bristol
Posts: 4,130
|
I could've just said, here's the before and here's the after. But I wanted to show how these things look during, to give people an inside into it all
__________________
Kev To be single is to be skint |
6th March 2009, 08:09 AM | #16 |
Old Timer
None - Don't currently own a MKIV Supra. Join Date: Jan 2005
Location: west mids
Posts: 4,196
|
looking good kev
__________________
dunk |
7th March 2009, 12:08 AM | #17 |
Beer and more Beer
|
Kev i don't envy you with the fibre glass task at all. I used to do it to my front bumper weekly as you know,but i can say you are doing a great job there and it looks great so far.
Keep up the good work mate it will all be worth it in the end |
7th March 2009, 02:23 PM | #18 |
GT4088r
Jap Spec RZ - Auto (TT) Join Date: Aug 2005
Location: staffordshire
Posts: 1,291
|
Looking great Kev
|
7th March 2009, 06:21 PM | #19 |
Officially NOT in Wales!
UK Spec - Manual Join Date: Oct 2005
Location: Bristol
Posts: 4,130
|
Thanks for the nice comments guys. Well after a few more efforts with the filler, I applied another coat of paint. I really can see the wood through the trees. Still have a little more to do though:
__________________
Kev To be single is to be skint |
7th March 2009, 10:00 PM | #20 |
Old Timer
Jap Spec GZ - Auto Aerotop (TT) Join Date: Jul 2004
Location: Worcester
Posts: 2,089
|
It's getting smoother Kev keep going it's good to see the effort.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|